Suka - Plug In switch on and Warm Up

INSTALLATION MANUAL

Unpacking

1 Where possible, always carry the packaged radiator to its proposed siting and
place the package flat on the floor with the folded sides of the cardboard upper-most.
2 Now cut the binding strap/s.
3 Next, carefully prise open both ends of the package.
4 The package is now free to fully open and expose the radiator.
5 The radiator can now be stood upright on the packaging. The top of the radiator is
easily distinguishable by the grill which runs along it.
6 Take off the grill and carefully place it aside.
7 Next, lift the radiator and lean it against the wall in its desired position where it is
to be fitted. Remove from beneath the cardboard, on which the radiator
previously lay, the two wall-fixing channel brackets and fixing pack.

Fitting instructions (see www.sueka.co.uk)